Skip to main content
Construction Insurance Bulletin

Six Construction Site Dangers and Safety Precautions

By July 7, 2017No Comments

The construction industry employs millions of people on job sites across the United States. While the fatal injury rate is high for this industry, you can understand construction site dangers and steps that protect yourself, co-workers and pedestrians.

Fall Protection

Most of the construction site fatalities occur from falls. Unstable work surfaces and failure to use protective equipment contribute to this construction site danger.

The right equipment can prevent falls.

  • Use guardrails, safety nets, restraint systems and fall arrest systems.
  • Stand on an elevated platform or aerial lift.
  • Secure all scaffolding.
  • Inspect lifts regularly.
  • Clean debris, liquid and dirt off all ladders, lifts or scaffolding.
  • Observe maximum weight limits on ladders, lifts or scaffolding.


The majority of crane accidents happen when the boom or load line connects with an overhead power line. Other dangers include getting struck by the crane or caught in its swing radius.

The crane should always be inspected before use. Only a qualified, experienced operator should run it, taking care to lift the recommended weight and watch for overhead wires. Never stand under the load, either.


Random chemicals around the construction site can cause burns, fires, explosions and respiratory problems.

Secure all chemicals safely. Maintain a Material Safety Data Sheet on all chemicals, and ensure all employees know where the MSDS are stored and how to read them. Train employees on the risks and proper use of those chemicals, too. They should also use protective gear and know how to access and use the spill kit.

Bodily Protection

Injuries to your head and unprotected eyes, face, hands and feet can cause disability or death.

Wear protective gear at all times, including safety glasses, gloves and steel toed, non-slip shoes. Remember to wear a hard hat and watch out for falling or fixed objects. You should also use caution when operating power tools.

Repetitive Motion

Operating the same tools over time or standing in one position all day can cause repetitive motion injuries and strains.

Take frequent breaks to protect yourself. Use proper posture or change positions frequently, too. You can also use less force as you do your job.

Electrical Safety

Any time you work around electrical tools or electricity, you’re in danger of electrocution.

Never bypass any device that protects you from electrical energy or climb near exposed wires. Always shut off the power before working on electrical circuits, too. Properly ground power tools, and inspect the cord for damage. If you use an extension cord, it should be certified for hard service.

Construction is a dangerous but important profession. Take these safety precautions as you prevent six construction site dangers.